Measure your success

Alarm devices for oil, grease and sand separators

Labkotec offers the widest range of alarm devices on the market for oil and grease separators. Separator alarm devices are extremely important for the efficient operation of industrial kitchens and restaurants, retail stores and fast-food outlets, as well as industrial installations and garages, car parks, service stations and car washes, airports, motorways, and transport routes near groundwater reserves. Separator alarms are used to indicate when oil, grease and sand separators need to be emptied.

Separator alarms are required to fulfil most industrial and communal environmental licenses and environmental certificates, as they are vital to environmental safety. For example, separator alarms are compulsory under the international EN 858 standard for separator systems for light liquids. The Labkotec White Paper presents European directives and standards concerning mounting, installation and operation of light liquid separators.
Contact form

Filter productsClear
idOil alarm device systems for oil and grease separators

idOil one sensor systems

With the idOil one sensor alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored.

idOil alarm device systems for oil and grease separators

idOil two sensor systems

With the idOil two sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored.

idOil alarm device systems for oil and grease separators

idOil three sensor systems

With the idOil three sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored.

idOil-D30 oil separator alarm device

idOil-D30 oil separator alarm

Up to three idOil sensors of any type can be connected polarity-free and can be mounted in an electrical cabinet on DIN rail

idOil-30 3G oil separator alarm

idOil-30 3G oil separator alarm

Alarm system with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.

Alarm system for monitoring liquid levels in oil and sand separators

idOil-30 Battery (3G) oil separator alarm

Alarm system is for monitoring liquid levels in oil and sand separators. Consumes very little power as the device only starts at set measurement intervals to perform the sensor measurements.

idOil sensors

idOil sensors

Digital and polarity free sensors to be used with the idOil control units

Power supply for idOil-30 Battery (3G) alarm devices

Battery Box 10

Power supply for idOil-30 Battery and idOil-30 Battery 3G alarm devices

LCJ1-1, LCJ1-2, LCJ1-3 Cable connectors

Cable connectors

Used for cable extension between idOil control unit and idOil sensors

LCJ1-SK4 cable connector

LCJ1-SK4 cable connector

Designed to extend sensor cables in potentially explosive atmospheres, especially together oil separator alarm devices.

Not available for purchase, please contact Labkotec sales team

LAL-SRW-01

Not available for purchase
Please contact Labkotec sales team

Please contact Labkotec sales team

LAL-SRW-18

Not available for purchase
Please contact Labkotec sales team

Not available for purchase, please contact Labkotec sales team

LAL-SRW-189

Not available for purchase
Please contact Labkotec sales team

Not available for purchase, please contact Labkotec sales team

LAL-SRW-09

Not available for purchase
Please contact Labkotec sales team

Not available for purchase, please contact Labkotec sales team

LAL-SRW-08

Not available for purchase
Please contact Labkotec sales team